WORKSHOP MANUAL
PARK
Chapter
EDITION
2020
PAGE
28 /
124
2. Unscrew the two nuts (2) and remove the hood
(1) by sliding it off the support hinge (3).
When assembling, pay attention to position the
plastic washer (4) on the side of the support
(3).
3.1.2 Removal of the front casing of the belts
NOTE
The front casing (1) consists of two el-
ements connected together by a screw, located
on the left side. The following procedure provides
for the removal of the two assembled elements,
which can be separated later.
1. Unscrew the right screw (2)
4
3
3
2
1
11
2
1
3
2