WORKSHOP MANUAL
PARK
Chapter
EDITION
2020
PAGE
27 /
124
3.1 BODYWORK AND CASINGS
3.1.1 Removing the rear hood
NOTE
The removal of the rear hood is necessary
when removing the engine, muffler and tank and
makes work on the tank and the battery easier.
1. Open the hood (1).
Summary
3.1 BODYWORK AND CASINGS ..............................................................27
3.1.1 Removing the rear hood ...............................................................27
3.1.2 Removal of the front casing of the belts ........................................28
3.1.3 Removal of the rear casings of the belts .......................................29
3.1.4 Removing the casings of the steering column ..............................31
3.1.5 Remove the cover under the seat .................................................33
3.1.6 Disassembly of the dashboard casing ..........................................33
3.2.1 Disassembly and reassembly of the articulated joint pulleys ........35
3.2.2 Separation of the two parts of the machine ...................................38
3.2.3 Replacement of the articulated joint bearings ...............................40
3.2.4 Replacement of the lifting device .................................................40
3 - CASINGS AND FRAME
1
