WORKSHOP MANUAL
PARK
Chapter
2 - INFORMATION FOR SERVICE CENTRES
EDITION
2020
PAGE
8 /
124
2.1 GENERAL INFORMATION
2.1.1 Machine identification
Each machine has a label (1) which shows the
technical specifications , the model (1a) and the
serial number (1b).
The model and serial number must be shown
when requests are made under Warranty, and are
indispensable for spare part orders.
Summary
2.1 GENERAL INFORMATION .................................................................8
2.1.1 Machine identification ...................................................................8
2.1.2 Engine identification .....................................................................9
2.1.3 Transmission Unit identification ....................................................9
2.1.4 Versions and equipment ...............................................................9
2.2 MACHINE PREPARATION AND DELIVERY.......................................9
2.2.1 Preliminary procedures .................................................................9
2.2.2 Tyre pressure check......................................................................10
2.2.4 Axial steering allowance adjustment ............................................11
2.3 TRANSPORTATION AND HANDLING ...............................................12
2.3.1 Machine transportation .................................................................12
2.4.1 Original spare parts ......................................................................14
2.4.2 Non-original spare parts ...............................................................14
2.5 MAINTENANCE ..................................................................................15
2.5.1 Criteria for maintenance ...............................................................15
2.5.2 Safety measures to be adopted ....................................................15
2.5.3 Tightening torque settings ............................................................15
2.5.4 Routine maintenance schedule ....................................................17
2.5.6 Safety devices check ....................................................................20
2.5.7 General checks ............................................................................22
2.6 TECHNICAL SPECIFICATIONS AND DIMENSIONS .........................24
2.6.1 Technical specifications ................................................................24
2.6.2 Overall dimensions .......................................................................26
2 - INFORMATION FOR SERVICE CENTRES
1
######
######
######
######
######
1a
1b
