Stiegelmeyer Seta pro, Instruction Manual, Page: 123 / 168

13.4.1 Periodic inspection
CAUTION
Replace O-rings with original LINAK O-rings only. Check the corresponding recesses in
the plug for dirt or damage, and lubricate with Vaseline, before reinserting the plugs.
We recommend supplementing the specified maintenance work with appropriate preventive
measures to further enhance trouble-free and fail-safe operation of the bed. A guide to pre-
ventive replacement of potentially relevant components can be obtained from the following
address:
Stiegelmeyer GmbH & Co. KG
Ackerstraße 42, 32051 Herford, Germany
Phone: +49 (0) 5221 185 - 777
Fax: +49 (0) 5221 185 - 219
Email: service@stiegelmeyer.com
For electric beds we recommend, as a guideline, that an annual DGUV 3 inspection be car-
ried out by our qualified customer service staff, with verification of adherence to the 2% error
rate (see also the DGUV 3 accident prevention regulations: § 5, Table 1B).
Risk of injury and material damage
Failure to heed this warning may result in injuries and damage to property due to improper
inspection.
•
In accordance with DIN EN 62353 (VDE 0751-1) (Association of German Electrical Engi-
neers – Regulation 0751-1), the inspection results may only be evaluated and documen-
ted by experts (a qualified electrician or, with the use of suitable measuring devices, a
person instructed in electrical matters as defined by DGUV 3) with the corresponding
knowledge, training and experience. Such persons must also attest that they have knowl-
edge of the beds that are to be inspected and of the relevant regulations (medical prod-
ucts act, operator ordinance, safety regulations, instruction manuals, etc.).
Proceed in the following order when testing according to EN 62353 (VDE 0751-1):
1. Visual inspection
2. Electrical measurement
3. Functional check
Maintenance
Instruction Manual 114