![background image](http://html1.mh-extra.com/html/stiebel-eltron/wsg-2-duo/wsg-2-duo_administrators-manual-for-operation-and-installation_1376881006.webp)
iNSTallaTiON
PrOFi SElECT modular system
6 |
WSP-2-DUO, WSG-2-DUO
8.1.4 TFS temperature controller adjustment options
Scale
TFS temperature controller
(control range 30-50 °C)
Notes
1
30
2
32
3
34
4
37
recommended setting:
5
39
between positions 4 and 5
6
41
7
43
8
46
9
48
10
50
8.2 Installation options
installation options are installed in the base station at the fac-
tory and cannot be ordered individually.
Designation
Internal
code
Description
Heating circuit
E1-HKT
1.1
Heating circuit, thermostatic
E1-HKE
1.2
Heating circuit, electric
E2-HKU
2
Heating circuit without mixer
Pipework thermal insulation
E7-WDr1
7.1
Pipework thermal insulation
E7-WDr2
7.2
Pipework thermal insulation
Drain set
E8-ES
8
Drain set
Contact thermostat
E9-aTr
9
Contact thermostat
Note
For dimensions and connections as well as the data
tables for the installation options, see chapter "instal-
lation / Specification".
[1.1]
Heating circuit with mixer, thermostatically
controlled | E1-HKT
Heating circuit with mixer with high efficiency pump including
pipework in the base station
D
00000
74
99
8
The flow temperature is controlled by an injection system
using a thermostatic control valve.
Scale
Temperature controller
(control range 20-50 °C)
1
20
2
23
3
27
4
30
5
33
6
37
7
40
8
43
9
47
10
50
Checking / correcting the heating water flow rate
f
f
Ensure heat supply through the central heat generator.
The flow temperature should have reached the design
value for the network.
f
f
Set the temperature controller to the required flow tem-
perature at the control valve.
f
f
Switch on the pump.
f
f
Perform hydronic balancing of the underfloor heating
circuit at the heating circuit distributor according to the
design engineer's specifications.
f
f
Do not draw off any DHW while testing the heating water
flow rate. Make sure that all thermostatic valves and un-
derfloor heating control valves are fully open.
f
f
after balancing is complete, check the set flow tempera-
ture again.
Summary of Contents for WSG-2-DUO
Page 26: ...26 WSP 2 DUO WSG 2 DUO NOTES...