![background image](http://html.mh-extra.com/html/stiebel-eltron/wpm/wpm_operation_1376611023.webp)
OPeRATION
Menu
www.stiebel-eltron.com
WPM |
23
EN
GL
ISH
END
- -:- -
- -:- -
TIME
TIME
START
26
�0
4�
01
�0
30
2
MAIN MENU
PROGRAMS
HEATING PROGRAM
HEATING CIRCUIT 1
f
f
Set the start or stop time using the Touch-Wheel. Confirm
your entry with OK.
Periods around midnight
Switching time pairs can be programmed only up to 24:00. If you
want to choose periods that extend beyond midnight, you will
need to set an additional switching time pair for the following day.
Example: Assume, for example, you want heating mode to be
enabled from 22:00 for four hours every Wednesday evening. The
time period ends on the following Thursday at 02:00.
f
f
For Wednesday, programme the period 22:00 to 24:00.
f
f
For Thursday, programme the period 00:00 to 02:00.
Deleting switching time pairs
f
f
Use the Touch-Wheel to select the switching time pair you
want to delete. Confirm the selection with OK.
f
f
Select the start time using the Touch-Wheel. Confirm the se-
lection with OK.
f
f
Reset the start time to "--:--" using the Touch-Wheel. Confirm
your entry with OK.
By resetting the start time, the associated end time is automat-
ically reset.
HEATING PROGRAM
Select HEATING PROGRAM to determine the times during which
rooms should be heated to the set comfort value. In the periods in
between, heating takes place to the set ECO value. The times are
determined individually for each available heating circuit.
Note
You can set the set values for each heating circuit under
SETTINGS / HEATING / HEATING CIRCUIT / COMFORT TEM-
PERATURE and ECO TEMPERATURE.
f
f
Under HEATING PROGRAM select the heating circuit for
which you want to specify the times.
DHW PROGRAM 1 /
2
Select DHW PROGRAM to determine the times during which DHW
should be heated to the set comfort value. In the periods in be-
tween, DHW is heated to the set ECO value.
Note
You can adjust the set values under SETTINGS / DHW /
DHW TEMPERATURES / COMFORT TEMPERATURE or ECO
TEMPERATURE.
The DHW circulation output is also switched in line with the times
programmed here.
PARTY PROGRAM
Note
In the start display, party mode is not displayed.
Select PARTY PROGRAM, to extend by a few hours the period in
which the heat pump provides room heating to comfort temper-
ature.
Note
You can adjust the set values under SETTINGS / HEAT-
ING / HEATING CIRCUIT / COMFORT TEMPERATURE or ECO
TEMPERATURE.
f
f
Use the Touch-Wheel to set the number of hours. Confirm the
selection with OK.
After the period has expired, the heat pump switches to the op-
erating mode applicable at the time.
HOLIDAY PROGRAM
In the holiday program, the heat pump provides room heating up
to the ECO temperature for a freely adjustable period.
The set room temperature is reduced to the ECO temperature. Frost
protection for DHW heating remains active.
The start day of the holiday period begins at 00:00. The final day
of the holiday period ends at 24:00.
Select the period for which you want to enable the holiday pro-
gram.
f
f
Select HOLIDAYS BEGINNING. Confirm the selection with OK.
f
f
Use the Touch-Wheel to select the field you want to change.
Confirm the selection with OK.
f
f
Use the Touch-Wheel to set the day, the month or the year.
Confirm the selection with OK.
f
f
Follow the same procedure in HOLIDAYS ENDING.
After the period has expired, the heat pump switches to the op-
erating mode applicable at the time.