INSTALLATION
Fitting the appliance casing
20
|WPL ICS classic | WPL IKCS classic
www.stiebel-eltron.com
12.2 Fitting the side panels
1.
2.
3.
D
00000
71
61
6
f
f
Position the side panel against the appliance, slightly offset
to the back.
f
f
Hook the side panel into the upper casing cover.
f
f
Slide the side panel forwards.
f
f
Secure the l.h. side panel at the bottom with three screws.
f
f
Secure the r.h. side panel at the bottom with two screws.
12.3 Fitting the front panel
WPL 09 ICS classic | WPL 17 ICS classic
D
00000
76
96
4
f
f
Position the designer fascia from above on the front fascia.
Ensure that the hooks on the front fascia click into place.
f
f
Secure the designer fascia to the front fascia using the nuts
provided (torque = 1.2 Nm).
1.
2.
D
00000
76
96
5
f
f
Position the programming unit from the front in the designer
fascia.
f
f
Keep hold of the programming unit as you push the retaining
frame onto it from behind.
f
f
Connect the connecting cable to the programming unit.
Ensure that it is connected correctly. The cable must face up-
wards and the numbers must be visible.
1.
2.
D
00000
76
97
2
f
f
Push the front panel onto the locking tabs until it audibly
clicks home.
f
f
Secure the front fascia at the bottom with two screws and
two serrated washers.
WPL 09 IKCS classic | WPL 17 IKCS classic
1.
2.
D
00000
76
96
1
f
f
Position the two frame sections at the back of the designer
fascia.
f
f
Connect the two frame sections using the screw provided.
2.
1.
D
00000
76
96
2
f
f
Position the designer fascia from the front on the front fascia.
f
f
Secure the designer fascia to the front fascia at the back
using the nuts provided (torque = 1.2 Nm).
