INsTALLAZIoNe
Installazione
LA 60 Trend | LA 60 Plus
| 63
IT
AL
IAN
O
f
Agganciare l'unità ventilatore nella scanalatura di guida
nel punto di passaggio dell'alloggiamento da incasso
nell'uscita aria.
f
Fissare l'unità ventilatore nell'alloggiamento con la vite
fornita in dotazione.
f
spingere il cavo di collegamento alla rete nell'alloggia-
mento attraverso l'apertura "Passaggio cavi elettrici". Il
cavo di collegamento alla rete deve entrare per 50 cm
nell'alloggiamento da incasso.
f
Preparare l'estremità del cavo di collegamento alla rete
sguainandola e spelandola.
f
sguainare il cavo di collegamento alla rete per una lun-
ghezza di 6 cm.
f
Far passare il cavo di collegamento alla rete attraverso il
passacavi dell'unità di comando.
f
Collegare la spina a 8 poli secondo lo schema dei collega-
menti che si trova sull'unità di comando. si veda il capitolo
"Allacciamento elettrico".
d
00000
84
584
f
Innestare l'unità di comando sull'unità ventilatore.
f
Fissare l'unità di comando con le 2 viti fornite in
dotazione.
d
00000
84
57
4
f
se si tratta di un'unità di comando con sensore di umidità,
spingere la testa del sensore da dietro nell'apertura appo-
sita sul supporto del filtro.
f
Per fissare il supporto del filtro nel foro della parete, girare
le viti dei ganci a parete in senso orario.
Poiché non è necessario che esista un collegamento tra l'al-
loggiamento da incasso e l'unità ventilatore, è irrilevante la
profondità di installazione dell'alloggiamento. Il supporto del
filtro è provvisto di ganci che assicurano una buona stabilità
nell'alloggiamento e nella muratura o nell'intonaco.
f
Montare il filtro.
f
Posizionare il controportellino interno.
f
ruotare il controportellino interno di 45°.
10.2 Apparecchio sopra intonaco
Per il montaggio dell'alloggiamento sopra intonaco deve es-
sere disponibile un tubo per l'aria di scarico dN 80-100 a filo
con la muratura.
10.2.1 Opzionale: Protezione antincendio
Il dispositivo antincendio è dotato di una serranda tagliafuoco
in materiale inibitore di fiamma, controllato da un fusibile ter-
mico. In caso di incendio, il fusibile termico sgancia la serranda
tagliafuoco, che cade in basso e chiude il tubo di ventilazione.
1
d
00000
84
57
5
1 Fusibile termico
Dispositivo antincendio direttamente sull'apparecchio
se il dispositivo antincendio deve essere montato direttamente
sull'apparecchio, staccare il connettore dal dispositivo antin-
cendio ruotandolo.
sigillare sul retro il dispositivo antincendio e avvitarlo nel tubo
di ventilazione che esce dalla parete.
se nella parete viene utilizzato un gomito, tenere conto della
profondità di immersione del dispositivo antincendio.