INsTALLAZIoNe
Installazione
62 |
LA 60 Trend | LA 60 Plus
≥
25
300
d
00000
84
50
4
300
d
00000
84
50
2
Sistema a secco
Per l'installazione in una parete a secco, l'alloggiamento da
incasso deve essere ermeticamente chiuso.
Foro necessario nella parete:
LA 60 G-U
foro quadrato
mm 245 x 245
LA 60 G-UB
foro quadrato
mm 225 x 225
Installazione con staffa di montaggio
d
00000
84
50
3
f
se necessario, accorciare la staffa di montaggio
ripiegandola.
!
Danni materiali
Non avvitare la staffa di montaggio al bocchettone
di scarico.
f
Fissare la staffa di montaggio all'alloggiamento da incasso
mediante viti.
f
Fissare la staffa di montaggio al solaio o alla parete del
pozzetto.
Installazione senza staffa di montaggio
f
Creare una base di appoggio orizzontale.
f
Installare l'alloggiamento in modo che successivamente
l'intonaco interno sia a filo con il profilo porta intonaco.
f
Avvitare e fissare l'alloggiamento da incasso nei fori lungo
il bordo.
Per consentire il fissaggio dell'alloggiamento al soffitto con
nastro perforato, l'alloggiamento presenta due fori vicino
all'uscita dell'aria.
Condotto aria di scarico
f
spingere il tubo di ventilazione che porta al condotto
principale sull'uscita aria dell'apparecchio.
f
Avvolgere il punto di passaggio con nastro sigillante in
alluminio.
Unità ventilatore
Per evitare danni e contaminazioni durante il trasporto o in
cantiere, rimuovere l'unità ventilatore dall'imballo soltanto di-
rettamente prima dell'installazione.
f
rimuovere il coperchio paramalta dell'alloggiamento da
incasso.
f
Controllare la corretta installazione dell'alloggiamento da
incasso.
f
rimuovere la sporcizia, ad es. residui di gesso o malta.
f
scollegare il cavo di collegamento alla rete dall'alimenta-
zione elettrica.
f
spingere il cavo di collegamento alla rete nell'alloggia-
mento attraverso l'apertura "Passaggio cavi elettrici". Il
cavo di collegamento alla rete deve entrare per 50 cm
nell'alloggiamento da incasso.
sezione minima del cavo: 3 x 1,5 NYM-J
d
00000
84
52
8
1
1 Vite di fissaggio