STIEBEL ELTRON DHE 27, Operation And Installation

Page: 80 / 356

INSTALLATIoN
Installation
80 | DHE www.stiebel-eltron.com
Making the electrical connection
WARNING Electrocution
Carry out all electrical connection and installation work
in accordance with relevant regulations.
WARNING Electrocution
The connection to the power supply must be in the form
of a permanent connection in conjunction with the re-
movable cable grommet. Ensure the appliance can be
separated from the power supply by an isolator that dis-
connects all poles with at least 3 mm contact separation.
WARNING Electrocution
Ensure that the appliance is earthed.
!
Material losses
Observe the type plate. The specified rated voltage must
match the power supply.
f f Connect the power cable to the mains terminal.
Fitting the lower back panel section
D
00000
53
27
5
1
1 Diffuser on lower back panel
f f Fit the lower back panel section into the back panel. Check
that both locking tabs are engaged.
f f
Align the mounted appliance by undoing the fixing toggle,
aligning the power supply and back panel, and then re-tight-
ening the fixing toggle. If the back panel does not sit flush
against the wall, you can secure the appliance at the bottom
with an additional screw.
!
Material losses
The cover plate of the lower back panel section must not
bend when installed.