13.56 MHz Legic®
Upgradable readers ARC
Installation instructions
13,56 MHz Legic®
Lecteurs évolutifs ARC
Notice d’installation
13.56 MHz Legic®
Lectores escalables ARC
Procedimiento de instalación
conforme con
NOM-024 -SCFI-2013
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1101C05 - Page
3
sur
12
-
Ed. 06/06/2019
Dimensions
Steps to remove the core from the front cover
Procedure to install the core into the front part
Procedure to change the front part
Slots
Clips
Step 1
Step 2
Do not use the buzzer as a lever
Place the core between the two slots at the top
of the cover.
And then pivot the core and press to insert it
between the two clips.
- Disconnect the flat flexible antenna cable from connector J6.
- Remove the core from the front part (steps 1, 2).
- Install the core in the keyboard front part.
- Connect the flat flexible antenna cable to connector J6 and the
flat flexible keyboard cable to connector J7.
-
Disconnect the flat flexible antenna cable of connector J6.
- Remove the core from the front part (steps 1, 2).
- Install the core in the screen front part.
- Connect the flat flexible antenna cable to connector J6 and the
screen ribbon to connector J14
.
- Disconnect the flat flexible antenna cable from
connector J6 and the flat flexible keyboard cable
from connector
J7.
- Remove the core from the front part (steps 1, 2).
- Install the core in the screen front part.
- Connect the flat flexible antenna cable to
connector J6 and the flat flexible screen cable to
connector J14
.
US
FR
ES