STF-Filtros FMA-6000, Installation, Operation And Maintenance Manual

Page: 4 / 40

4
SAFETY INSTRUCTIONS
1. Prior to installation or filter operation, read carefully this manual.
2. Please note, the filters enters into a backflushing mode automatically, without prior warning.
3. Non authorized modifications or changes on the equipment are permitted.
4. Filter installation should be performed so as to avoid direct water splashing on the electrical
components.
5. Take correct precautions when raising and placing the equipment so that no damages are
produced.
6. Make sure to leave enough clearance so as to enable easy access for future treatments and safe
maintenance operations.
7. It is necessary to place a shut-off valve in the collector before the equipment to make the
maintenance easier.
8. Make sure that the equipment is operating at a correct working pressure.
9. Disconnect the filter from power supply before maintenance or treatment.
10. Never switch on the equipment without placing all the safety elements.
11. Don’t carry out a differente maintenance different from the indicated in this manual.
12. Use only original spare pieces.