STF-Filtros FMA-6000, Installation, Operation And Maintenance Manual

Page: 15 / 40

15
PRESSURE DIFFERENCE” will appear on the screen. Besides this, in case of pressure excess, the
legend “OVERPRESSURE” will be indicated.
If an alarm goes on or there is an operation failure, a triangle warning symbol will appear on the screen.
MENUS ACCESS:
-
INSTALLATION BACKWASHING(3): This screen allows you to start the backwashing
manually by pressing the STOP WASHING button, in this way the backwashing process
is stopped, the drain valve closes, the backwashing pump stops and the crown rotation
stops.
If you press X it returns to the previous screen (2).
- BACKWASHINGS CARRIED OUT(4): This screen allows you to look up the
backwashings number that have been carried out in the equipment according to the
causes: If it has been manually (by means of the manual backwashing button),
automatically (because of pressure differential) or because of time. Besides this, the
total accumulated time is also indicated. Accumulated backwashings can not be deleted
and also the number of total backwashings that the equipment carries out between the
STF maintenance processes is indicated. Only STF personnel can turn this value to
zero.
If you press X it returns to the previous screen (2).
If you press BACKWASHINGS RESET the updating screen will appear.