STF-Filtros FMA-2000 series, Installation, Operation And Maintenance Manual

Page: 30 / 47

Installation, operation and maintenance manual - FMA 2000
Ref: 2000/CPF01/230/VH 30

S – Setpoint value

C – Meter real value
Press keys

to move over S. Press OK to modify values by using keys

and
 
.
When finished, press OK again to accept the new value.
Press ESC to quit
C16– Switch pressure & pressure transducers selection.
It allows to control the filter pressure differential. It is possible to do it by means of the pressure
transducers or pressure switches.
 S – Setpoint value:
o
1 – Work with pressure switch
o
2 – Work with pressure transducers (standard)
Press keys

to move over I1. Press OK to modify values by using keys

and
 
.
When finished, press OK again in order to accept the new value.
Press ESC to quit.
BEWARE!
IT IS NOT ADVISABLE TO MODIFY THIS VALUE. IF WATER QUALITY
WORSENS IN A SPECIFIC MOMENT, THIS VALUE WILL BE MODIFIED
TO A HIGHER ONE SO THAT THE FILTER CAN RECOVER
AUTOMATICALLY.
A1 – Pressure difference set value when working with pressure transducers.
It shows the pressure difference of the automatic backwashing cycle start when using pressure
transducers:
 I1 – Effluent water pressure reading

I2 – Influent water pressure reading

OS – Set value
Press keys

to move over OS. Press OK to modify values by using keys

and
 
.
When finished, press OK again in order to accept the new value.
Press ESC to quit.