5
Stewart Filmscreen –
WallScreen 2.5
ABOUT WALLSCREEN 2.5
Your WallScreen 2.5 fixed frame supports virtually all projection applications. The Velux finish is
designed to absorb any projector overscan. The WallScreen 2.5 features angled corners and a
beveled edge that brings the image area closer to the front of the frame.
The WallScreen 2.5 features snaps and brackets that move on the frame to allow for
adjustments. Rear projection is available as an option. The hanging bar is the standard mount.
Other options include the Wall Board Mount, the Eye Bolt Mount (Hanging), and Aperture Mount.
USING THIS MANUAL FOR INSTALLATION
The WallScreen 2.5 screen is designed for easy installation. There are no user-serviceable parts
contained within the unit.
VOIDING YOUR WARRANTY
NOTE: Failure to comply with the instructions and guidance contained in this manual may
result in voiding your warranty
.
For the instructions related to your specific mount type, refer to the appropriate page:
‣
Hanging Bar Mount (page 9)
‣
Wall Board Mount (page 11)
‣
Eye Bolt Mount (Hanging) (page 13)
‣
Aperture Mount (page 14)
At the designated point in the installation, you will need to refer to the general instructions for:
Attaching the Screen to the Frame (page 15-16).
