16
Stewart Filmscreen –
WallScreen 2.5
ATTACHING THE SCREEN TO THE FRAME (CONTINUED)
4.
Place the
frame over the screen, snap side down
(see Figure 14).
5.
Starting with the snaps on the top corners and then horizontally along the top while lifting the frame
with one hand, snap the screen into the frame. Gently allow the screen to stretch onto the snaps.
Do not jerk, wrinkle, or crease the screen material, as it can be damaged (see Figure 14).
6.
Lift the frame to a vertical position to finish attaching the sides and bottom row of the snaps (see
Figure 15).
Note:
If there are any wrinkles or puckers on the screen, the snaps on the frame can be adjusted
side to side. Lay the frame viewing side down on a clean surface. A movement of 1/16” to 1/8”
(1.6mm to 3.2mm) is usually sufficient to eliminate puckers.
Figure 14: Attaching Top Corner Snaps
Figure 15: Attaching Remaining Snaps
