12
Stewart Filmscreen –
WallScreen 2.5
WALL BOARD MOUNT (CONTINUED)
7.
Remove the boards from
the frame and attach them
to the wall using the
provided hardware or other
appropriate fasteners such
as lag bolts, wall anchors,
molly bolts, wood carriage
screws, etc. (see Figure 9).
8.
Attach the screen to the
frame
(see pages 15-16).
9.
Attach the frame/screen
assembly to the previously
mounted wall boards on the
wall using the 3/4”
hex head
bolts (see Figure 10).
Note:
On some custom sized
frames, the use of additional
“back support braces” is
required. These vertical support
braces assure parallel top and
bottom frame member
alignment once the screen has
been attached to the frame. Do
not install the screen/frame
without required back braces.
Figure 9: Attaching the
Wall Boards to the Wall
Figure 10: Finished Screen
Attached to Wall Boards
⚠
CAUTION
Be careful not to touch or scratch the
viewing surface.
