15
Stewart Filmscreen –
WallScreen 2.5
ATTACHING THE SCREEN TO THE FRAME
DO NOT perform this step UNTIL instructed to do so in the mounting section.
UNPACKING AND UNROLLING THE SCREEN
The viewing side of the projection screen is rolled to the inside to protect optical quality. The screen
is rolled lengthwise.
1.
Remove the screen from the cardboard shipping tube.
2.
On a clean surface, unroll the screen viewing side up (see Figure 13).
3.
Remove the protective packing material from the screen material.
⚠
CAUTION
‣
Be careful not to touch or scratch the viewing surface.
‣
Do not use any tools to fasten the screen to the frame.
‣
Do not fold or crease the screen.
Figure 13: Unrolling the Screen
