12
Stewart Filmscreen – AT 1.5
EYE BOLT (HANGING) MOUNT
NOTE
: Professional mounting techniques should be used. Stewart Filmscreen cannot be liable
for substandard or faulty installations. Failure to comply with the instructions and guidance
contained in this manual may result in voiding your warranty.
1.
Attach the screen to the frame (see pages 16-18).
2.
Use the Eye Bolt Mount to suspend the screen. Eye bolts are already secured to the frame,
making your AT 1.5 ready for installation to an appropriate surface (refer to Figure 8).
Note:
A false ceiling is not intended to support the weight of an AT 1.5. Contact a Stewart
representative for more information.
Figure 8. Eye Bolts Mounted Securely to Frame
NOTE:
On some large custom sized frames the use of additional “back support braces” may be
included. These vertical support braces assure parallel top and bottom frame member alignment
once the screen has been attached to the frame. Do not install the screen/frame without required
back braces.
⚠
CAUTION
Be careful not to touch or scratch the viewing surface.
Eye Bolt
