5
Stewart Filmscreen – AT 1.5
ABOUT THE AT 1.5 SCREEN
The AT 1.5 fixed frame supports all projection applications. The screen features angled corners and a
beveled edge that brings the image area closer to the frame. The tensioned and grommet mounting
assures perfect lay-flat characteristics of the screen. The Velux
TM
finish is designed to absorb any
projector overscan.
USING THIS MANUAL FOR INSTALLATION
If you are using this manual to install the AT 1.5, you should be aware that it describes procedures for
several types of mounts. You must refer to the section for the type of mounting system you are utilizing.
In addition, there are general instructions for attaching the screen to the frame that are provided in a
separate section. This procedure is to be performed at a specific step in the overall sequence.
For the instructions related to your specific mount type, refer to the appropriate page:
‣
Wall Board Mount (page 9)
‣
Wall Plate Mount (page 11)
‣
Eye Bolt (Hanging) Mount (page 12)
‣
T-Stand (Self-Supporting) Mount (page 14)
‣
Aperture Mount (page 15)
At the designated point in the installation, you will need to refer to the general instructions for
Attaching the Screen to the Frame
,
pages (
16-18
).
