14
Stewart Filmscreen – AT 1.5
T-STAND (SELF-SUPPORTING) MOUNT
NOTE:
Professional mounting techniques should be used. Stewart Filmscreen cannot be liable
for substandard or faulty installations. Failure to comply with the instructions and guidance
contained in this manual may result in voiding your warranty.
1.
Attach the screen to the frame (see pages 16-18).
2.
Use the T-Stand knobs provided to first attach the vertical members to each base, then attach
the finished screen (frame/screen assembly) to the T-Stands. The through holes on each vertical
member should run parallel to the base (refer to Figure 9).
3.
Hand-tighten the knobs.
NOTE:
On some large custom sized frames the use of additional “back support braces” is
required. These vertical support braces assure parallel top and bottom frame member
alignment once the screen has been attached to the frame. Do not install the screen/frame
without the required back braces.
⚠
CAUTION
Be careful not to touch or scratch the viewing surface.
Figure 9. Attaching T-Stand Knobs
