10
Stewart Filmscreen – AT 1.5
WALL BOARD MOUNT (CONTINUED)
8.
Remove the boards from
the frame and attach them
to the wall using the
provided hardware where
applicable or other such
appropriate fasteners (lag
bolts, wall anchors, molly
bolts, wood carriage screws,
etc. (refer to Figure 4.)
9.
Attach the screen to the
frame (see pages 16-18).
10.
Attach the frame/screen
assembly to the previously
mounted wall boards on the
wall using the 1/4-20 x 3/4” hex
head bolts (refer to Figure 5).
Note:
On some large custom sized
frames the use of additional “back
support braces” may be included.
These vertical support braces
assure parallel top and bottom
frame member alignment once the
screen has been attached to the
frame. Do not install the
screen/frame without the
required back braces.
Figure 4: Attaching the
Wall Boards to the Wall
Figure 5: Finished Screen
Attached to Wall Boards
⚠
CAUTION
Be careful not to touch or scratch the
viewing surface.
