Low Voltage Control with 3-button momentary wall switch
(standard control)
A standard Low Voltage Control is sequentially tied to each motor. A 3-
button momentary switch can be connected to the switching input terminals.
Use 20 - 24 ga. 4-conductor electronic communication wire to connect to the
switch input wire located in the switch connection junction box.
The color connections are:
White is common.
Red is up.
Black is down.
Yellow is stop.
A parallel connection to this switching input can also be made to other
associated A/V switching networks. Any additional switches connected here
must be "momentary" type.
Once the connections have been made a "Down" command will open the
door. Once the door has opened, the projection screen will deploy. Upon
deployment of the projection screen the video camera pod will deploy. When
an "Up" command is given, the camera pod will retract. At that time the
projection screen will retract followed by the closing of the door.
Camera connection box and optional speaker connector
The video camera connection box is located on the right end plate of the
housing. An optional speaker terminal connector block is also in this
location. If you have optional speakers included, they are connected here.
Video Conference Screen: Owner’s Manual
7
