background image

17

STEWART FILMSCREEN CORPORATION (Stewart) warrants its Stewart Filmscreen products to the original 
purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date 
of purchase by the original purchaser or eighteen (18) months from date of manufacture, as defined in the serial 
number, provided they are properly operated and maintained according to Stewart instructions and are not 
damaged due to improper handling or treatment after shipment from the factory. This warranty does not apply to 
equipment showing evidence of misuse, abuse, or accidental damage, including neglect caused by improper 
installation (i.e. proximity to hot lights, exposure to extreme heat or cold, exposure to excessive humidity, etc.). 
Stewart on-site warranty repair services are not available for this product.

Stewart’s sole obligation under this warranty shall be to repair or to replace (at Stewart’s sole discretion) the 
defective part of the merchandise. This warranty expressly does not cover any costs of removal, installation, 
framing, or other costs incident to replacing the screen or returning it to Stewart. Returns for service should be 
made to your Stewart dealer. If it is necessary for the dealer to return the screen or part to Stewart, transportation 
(freight) expenses to and from Stewart are payable by the purchaser. Stewart is not responsible for damage in 
shipment. To protect yourself against damage or loss in transit, insure the product and prepay all transportation 
expenses.

This warranty is in lieu of all other warranties, expressed or implied, including warranties as to fitness for use and 
merchantability. Any implied warranties of fitness for use, or merchantability, that may be mandated by statute or 
rule of law are limited to the one (1) year warranty period. This warranty gives you specific legal rights, and you 
may also have other rights which vary from state-to-state. In no event will Stewart be liable for sums in excess of 
the purchase price of the product. No liability is assumed by Stewart for expenses or damages resulting from 
interruption in operation of equipment, or for incidental, direct, or consequential damages of any nature. 

In the event that there is a defect in materials or workmanship of a Stewart Filmscreen product, you may contact 
our Customer Service Department at 1161 W Sepulveda Blvd, Torrance, California 90502- 2797 (310-784-5300) 
Toll free (800-762-4999).

IMPORTANT: This warranty shall not be valid and Stewart shall not be bound by this warranty if the product
is not operated and maintained in accordance with Stewart’s written instructions. Stewart Filmscreen Corporation 
shall not be liable for any and all consequential damage(s) occasioned by the breach of any written or implied 
warranty pertaining to the sale of a Stewart Filmscreen product in excess of the purchase price of the product 
sold.

Printed in USA. Rev. 7/25/16

LIMITED ONE YEAR WARRANTY

Summary of Contents for Luxus Deluxe ScreenWall





















Reviews: