Stewart Filmscreen Corp Luxus Deluxe ScreenWall, Owner'S Manual

Page: 7 / 20

1. Identify the location of wall studs where you can securely mount the EZ Mount hanging bar.
2. Use a level to accurately position the EZ Mount hanging bar on the wall.
3. Drill holes through the bar into the studs.
4. Use the provided 2” screws or other appropriate fasteners to secure the EZ Mount hanging bar to the wall studs.
Note: A minimum of three (3) screws are recommended to safely secure the frame.
5. Check to make sure the bar is level.
6. Assemble frame (see page 6).
7. Hang the assembled frame, without the screen attached, on the EZ Mount hanging bar to ensure that it is correctly
mounted.
8. Mark on the wall where you will mount the steel pucks to studs that will align with the magnets fastened on the frame.
Note: Find studs that allow the pucks and magnets to be positioned approximately 12” to 24” from
the edge of the frame on each side.
9. Remove the frame. Drill into the studs and mount the steel pucks with the provided 2-3/8” screws or other
appropriate fasteners. Use shims as needed.
10. Reposition the frame, slide and secure the magnets so that they align with the steel pucks mounted on the wall.
11. Remove the frame and follow the steps for attaching the screen to the frame (see pages 14-15).
12. Your ScreenWall is now ready to hang in its final position. See figures 2-4 on page 8.
To accurately position the frame, you will mount the EZ Mount hanging bar and temporarily hang the frame prior
to attaching the screen material. On the bottom of the frame, there are magnets you can slide to line up with
steel disks you will align with wall studs. If the wall is not perfectly flat, the force of the magnet may cause the
frame to bend. For this reason, shims can be used to place between the wall and the steel pucks so that the
frame lays completely flat. The screen should not be attached to the frame at this point. Refer to figures 2-4 on
page 8.
Professional mounting techniques should be used. Stewart Filmscreen can not be liable for substan-
dard or faulty installations.
EZ MOUNT BRACKET SYSTEM
7
Caution:

Be careful not to touch or scratch the viewing surface