ATTACHING THE SCREEN TO THE FRAME
15
If there are any wrinkles or puckers in the screen, the snaps on the frame can be
adjusted side to side. Lay the frame viewing side down on a clean surface. A
movement of 1/16” to 1/8” (1.6mm to 3.2mm) is usually sufficient to eliminate
puckers.
Note:
Figure 14: Attaching Remaining Snaps
Figure 13:
Attaching Top Corner Snaps
4. Place the frame over the screen (snap side down).
5. Starting with the snaps on the top corners and then horizontally along the top, while lifting the frame with one hand, snap
the screen into the frame. Gently allow the screen to stretch onto the snaps. Do not jerk, wrinkle or crease the screen
material, as it can be damaged. Refer to Figure 13.
6. Lift the frame to a vertical position to finish attaching the sides and bottom row of the snaps. Refer to Figure 14.
Attaching the Screen to the Frame
Summary of Contents for Luxus Deluxe ScreenWall
Page 18: ...MAINTENANCE NOTES 18 ...
Page 19: ...19 ...
