8
Stewart Filmscreen
STANDARD CONTROL - KEYPAD CONTROL
A standard, 3-button, low-voltage keypad is supplied for both the standard controller and the optional
Cima-Link Controller Accessories
MAKING THE CONNECTIONS
1 1 Connect the RJ25 cable to the keypad
2 2 Connect the other end of the RJ25 cable to the Cima unit
Note:
The maximum length of the RJ25 cable shall not exceed 50’
OPERATION
Press the “Down” button once, and the Cima screen will automatically
extend fully to its pre-set limit, and then will power itself off Press
the “Up” button once and the Cima screen will automatically retract
back into the case and power itself off If a custom position is desired,
simply press the “Stop” button at any time during the screen’s
deployment or retraction (See Figure 4)
Note:
See the section on Adjusting the Screen Extension for
information regarding the default limits by which the screen can be
adjusted up or down from the factory pre-set
Figure 3: Keypad Connection
ADDITIONAL
RJ25 JACK FOR
OPTIONAL CONTROLS
RJ25 JACK
RJ25 JACK
KEYPAD - BACKSIDE
RJ25 CABLE
Figure 4: Keypad Face
UP
DOWN
STOP
