Cima NT AC
9
STANDARD CONTROL - PROJECTOR TRIGGER CONTROL
MAKING THE CONNECTIONS
1 Connect a projector trigger cable to the projector (Note: projector trigger cable not provided – the
installer needs to make the cord from a RJ25 cord, cut one end off and add the mono plug onsite )
2 Connect the other end of the trigger cable to the Cima unit (RJ25 plug)
HOW IT WORKS
When the projector is turned on or off a signal is sent to the controller within the motor and will trigger
the screen to move up or down
If there is a sudden change in direction, the motor is paused for 1/2 second before reversing direction
This is to prevent strain on the motor mechanism, and to prevent damage to any material controlled
by the motor Relays are automatically de-energized after 120 seconds of operation to reduce power
consumption
Figure 5: Projector Connection
ADDITIONAL
RJ25 JACK FOR
OPTIONAL CONTROLS
RJ25 JACK
PROJECTOR
TRIGGER CABLE
(NOT INCLUDED)