Cima NT AC
7
INSTALLING THE SCREEN INTO THE CEILING
Professional mounting techniques should be used Stewart Filmscreen cannot be liable for substandard
or faulty installations
i
CAUTION
During installation of the Cima Above Ceiling Non-Tensioned ElectriScreen into the ceiling opening,
be advised that damage can occur to the screen Perform the following actions to avoid damage:
`
`
Wear clean gloves throughout the installation process to prevent damage to the screen housing
or screen material
`
`
Make sure that the screen batten never contacts or strikes any objects as damage may occur
Note:
A false ceiling is not intended to support the weight of a Cima Above Ceiling Non-Tensioned
ElectriScreen
1 Remove the dust cover for easier access if desired
2 Raise the screen into the ceiling
3 Fasten the mounting brackets to the threaded rods or beams above the ceiling (Note: The unit is
usually suspended, as shown in Figure 1, but it can be secured to the ceiling using bolts or other
appropriate fasteners as well )
4 Make sure the bottom is flush with
the finished ceiling
5 Make sure the case is level
6 Plug in the STI wiring and terminate the power
7 Replace the dust cover as needed
Figure 2: Underside View Isometric
Figure 1: Overhead View Isometric
RJ25 JACK