Final Assembly Continued
Tail Gear Assembly Continued
Fit tail wheel to gear wire and retain with a
single 90 degree bend.
☐ ☐
Trim one side off of “thick” double sided
servo horn included with HS-55 servo.
☐ ☐
Reduce length of trimmed servo horn by
cutting off one position as illustrated.
☐ ☐
Install provided Du-Bro RC Mini E/Z
Connector (DUB845) to outside hole in
servo horn.
☐ ☐
Electronically center servo with radio or
servo tester. Reference plan set to make
one push-rod from 1/32 in. wire stock,
connect to control horn at elevator, pass
through E/Z connector.
☐ ☐
Retain pushrod at control horn using
provided Du-Bro RC Micro EZ link
(DUB849).
FREDe © 2009 Stevens AeroModel all rights reserved.
Page 25 of 32