Project Checklist
S-Pou! 300
- Kit Inventory
☐
Laser cut wood, 11 Sheets, see parts inventory on page 4
☐
Illustrated Build Instructions
☐
Computer Drawn Detail Sheets (2 pages)
☐
Self-Adhesive Vinyl Profile Pilot and Instrument Panel Sheet
☐
Long Hardware (Taped to back of wood brick):
1 - 1/16 in x 12 in yellow nylon tube [2022]
1 - 0.020 in. x 12 in. wire [*]
1 - 0.032 in. x 12 in. wire [1002]
1 - 0.062 in. x 12 in. wire [1006]
☐
Hardware Bag:
1 - 3/32 in. x 4 in. Aluminum Tube [*]
1 - 1/8 in. x 2 in. Aluminum Tube [*]
1 - 1-1/2 in. length of 1/16 in. Heat Shrink Tube [2020]
1 - 4.5 in. length of 1/8 in. diameter Hardwood Dowel [1021]
2 - #4 Nylon Washers [3018]
2 - 3/16 in. diameter x 1/16 in. thick Neo-Magnets [4014]
3 - Black Nylon Dished Washers [4016]
4 - #2 x 1/4 in. Screws [3011]
8 - #16 Rubber Bands
Suggested Electronics (Available at StevensAero.com)
☐
Transmitter with at least 3 channels [SPM5500]
☐
Micro Receiver (4-6g) [SPMAR6115E]
☐
SA Sport BL250 2200KV brushless motor [SUPA1510-15]
☐
SA Sport 10 Amp Brushless ESC [SUP10AESC]
☐
6x3 Propellor [GW/EP6030]
☐
2mm Prop Adaptor [EFLM1920]
☐
2 - Hitec HS-35HD ultra sub-micro servos [HRC33035S]*
☐
7.4V 250-325mAh 2S Li-Poly Battery [THP3252SP45]
* HS-55’s may be used with minor modification to the fuselage - weight penalty of +8g
Build Instructions
S-Pou! 300
- Build Instructions © 2011 Stevens AeroModel, all rights reserved.
!
Page 3
Required Building Supplies and Tools
☐
Du-Bro RC 2.0 in. Lite Wheel [DUB200SL]
☐
1/2 oz. Medium CA Glue [PAAPT03]
☐
1/2 oz. Thin CA Glue [PAAPT09]
☐
CA glue applicator tips [PAAPT21]
☐
Hobby Knife with ample supply of #11
blades
☐
Sanding block with 400 and 600 grit paper
☐
Heat Gun and Covering Iron
☐
Small Needle Nose Pliers
☐
Hinge Tape [DUB916]
☐
3/4 in. wide self-adhesive Velcro [DUB348]
☐
Soldering Iron
Optional Building Supplies and Tools
☐
1/2 oz. Thick CA Glue [PAAPT20]
☐
CA glue accelerator (kicker) [PAAPT15]
☐
CA glue de-bonder [PAAPT16]
☐
Balsa filler [HCAR3401]
☐
Double Sided Tape [DUB634]
☐
Long sanding bar
☐
Modeling Clay for Ballast
☐
Masking Tape (Low tack painters tape)
