Fuselage Continued
100. Finish the model - Paint the profile pilot figure “P” and cockpit interior as desired. Now, fit
the pilot to the slot in the cockpit, ensuring that the pilot is facing forward - this is critical for
proper control of the model in flight. Bond with CA glue.
101. Fit the propellor [EFL9051] to the motor shaft (propeller is not a press fit! rather it threads on
to the output shaft of the gearbox). Tip! Use needle nose pliers to firmly grasp the propellor
shaft while you thread the prop onto the end of the shaft stub.
Congratulations! The basic assembly of the model is complete. Feel free to add extra
scale details such as silver highlights on the radial engine or rigging the optional flying
wires from thread swiped from mom’s sewing kit (quick she’s not looking).
If you are an “assembler”, hang this puppy in your den and admire your work while you log
onto stevensaero.com to find your next project. Pilot builders, proceed to the “Setup” and
“Pre-Flight” sections and prepare to impress your buddies at the flying field!
Thanks again for purchasing our product. We hope you enjoyed building this model as
much as we enjoyed dreaming it up for you. Happy flying! -Stevens AeroModel
Build Instructions
1911 Cuadron Build Instructions. © 2013 Stevens AeroModel all rights reserved.
!
Page 34
□
□
