Fuselage Construction Cont.
Temporarily attach one strut to axle with Du-
Bro RC
Micro II E/Z Link
[DUB920].
Ensure
front/rear strut orientation is correct - short
strut goes in front.
Insert strut into fitting and secure with a Du-
Bro RC
Micro E/Z Link
. Align nylon fitting
with strut end. Bond fitting with medium CA.
Repeat process with opposite wing. Remove
wing and struts when finished.
Tail Rigging:
Optional - Cut 1/16 dia. x 1/4
in. aluminum tube in half to form rigging
crimps. Plenty have been provided should
you wish not to reduce this part’s size.
Cut a 30 in. length of supplied stainless
rigging wire. Slide one crimp onto wire.
Pass wire through hole in middle strut F3 near
main axle.
eHopper
TM
© 2009 Stevens AeroModel all rights reserved.
Page 26 of 36
