Fuselage Construction Cont.
Pilot’s Seat.
Please read this entire topic before
beginning assembly of this part.
Choose the set of ply seat parts appropriate
to the radio gear you intend to use. The
deeper seat sides S1a/S2a will accommodate
JR S185 micro servos. The thinner sides S1b/
S2b are used with the Spektrum AR6400.
Instruction Given For JR S185 Micro Servos
Fit seat side S1a (S1b if building for
AR6400) to seat bottom S3. tack glue
with thin CA.
Fit the other side S1a to seat bottom. Tack
glue in place.
Fit seat front S2a (S2b if building for
AR6400) to assembly. Tack glue.
Gently pinch sides together and fit lower back
rest S4.
Ensure etching faces forward.
Tack
with thin CA.
Fit upper back rest S5 between sides,
ensuring etching faces forward, and tack in
place.
eHopper
TM
© 2009 Stevens AeroModel all rights reserved.
Page 15 of 36
