Fuselage Construction Cont.
Trap 1 in. wheel in fork assembly with wire
axle. Retain axle with a drop of medium CA.
Ensure that wheel is not bonded to axle.
Carefully check alignment of fuselage and
correct any errors. When satisfied, bond all
joints with medium CA.
Fit vertical stabilizer to slot on bottom of
fuselage boom.
Ensure stabilizer is aligned
with the vertical centerline of fuselage and
bond with Medium CA.
Using a 0.025 drill, open hole for rudder hinge
in center of notch at end of boom.
Fit ply rigging tab F10 in slot in ply hinge F9.
Tack glue rudder hinge assembly to base of
vertical stabilizer.
eHopper
TM
© 2009 Stevens AeroModel all rights reserved.
Page 20 of 36
