background image

10

11

SPAre PArTS LIST

Y. Stern Engineering Ltd. warrants that its electronic products will be free of defects in 
material and workmanship during normal use for two years from the date the product is 
purchased. 
If a defect is found in normal use, Y. Stern Engineering Ltd. will, at its discretion, repair, 
provide a replacement part or product, or make appropriate adjustments. Damage 
caused by accident, misuse, or abuse is not covered by this warranty. Improper care 
and cleaning will void the warranty. Proof of purchase (original sales receipt) must be 
provided to Stern Engineering Ltd. with all warranty claims. 
Stern Engineering Ltd is not responsible for labor charges, installation, or other incidental 
or consequential costs other than those noted above. In no event shall the liability of 
Stern Engineering Ltd. exceed the purchase price of the product. 
If you believe that you have a warranty claim, contact your Stern Distributor, Dealer or 
Plumbing Contractor. Please be sure to provide all pertinent information regarding your 
claim, including a complete description of the problem, the product, model number, 
the date the product was purchased, from whom the product was purchased and the 
installation date. Also include your original invoice. 
Y. STERN ENGINEERING AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty excludes product damage due 
to installation error, incorrect maintenance, wear and tear, battery,  product abuse, or 
product misuse, whether performed by a contractor, service company, or the consumer. 
This warranty does not cover product damage caused by the following: 
- Incorrect installation. 
- inversions of supply pipes.
- Pressures or temperatures exceeding recommended limits.
- Improper manipulation, tampering, bad or lapsed maintenance. 
- Foreign bodies, dirt or scale introduced by the water supply or soap tank.
- Use of the soap outside of viscosity specifications.
- Alteration of the original soap/foam dispenser components (including pipes).

LImITeD wArrANTy 

Seals and Screws Kit Free

07210031

Seals and Screws Kit Free E

07210026

10-Pack Sensor kit Free

07220274

10-Pack Sensor kit Free E

07220377

Filter  

08530013

Cover Kit Free

07270007

Cover Kit Free E

07270019

10-Pack Solenoid valve kit

07230049

Transformer (EU plug)

06522091

Remote Control 13B (Optional)

07100005

Soap & Water Remote Control (Optional)

07100014

Summary of Contents for FREE 113100










Reviews: