2
3
Pre-INSTALLATION INfO
Check contents
Separate all parts from the packaging and check each part with the “Pack contents”
section.
Pay attention to the different models variations.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your electronic product until you
obtain the missing parts.
Warnings
Do not install facing a mirror or any other electronic system operated by an infrared
sensor.
To prevent reflection problems, it is recommended to keep a minimum distance of
1.50 meters between the product and any other objects.
Preparation for installation
Flush water supply lines thoroughly before installing the product. Do not allow dirt,
Teflon tape or metal particles to enter the water line.
Shut off water supply.
Important
All plumbing is to be installed in accordance with applicable codes and regulations.
Note:
Keep a minimum distance of 500mm between the upper surface of the bowl
and the infrared sensor.
Familiarize yourself with the parts names and confirm that all parts are included.
PACK CONTeNTS
1 X 200 mm INLeT PIPe
1 X wALL fLANge wITH rUbber
SeAL
1 X fLUSH VALVe bODy wITH
regULATINg VALVe
