6
7
DETECTION RANGE
DELAY IN TIME
DELAY OUT TIME
TEMPORARY OFF
FUNCTION
R E S E T
24 HOUR HYGIENE
FLUSH
Adjusting the settings with the remote control
If necessary, the sensor settings can be adjusted as following:
Shut off the water supply. In order to adjust the sensor with the remote control,
hold the remote control straight in front of the sensor in a distance of about 6-8”
(15- 20cm). Choose the function you want to adjust by pressing once on one of the
function buttons. After pressing once on a specific function button, a quick flashing
of the LED at the front of the sensor will occur. At this stage, you can change the
setting by pressing the (+) or the (-) buttons,
Every push will increase or decrease one level. After finishing the adjustment, turn
the water supply back on.
FLOW TIME
SeTTINgS ADJUSTmeNT
SeTTINgS ADJUSTmeNT
DETECTION RANGE: The sensor range is the greatest distance that an
object can be away from the sensor to activate the flush valve. The
sensor is factory preset.
To adjust the sensor range press + to increase detection range and – to
decrease the detection range of the sensor.
FLOW TIME: This function determines the water flushing time once the
user leaves the urinal.
Press the two waves button. Wait until a quick flashing of the LED of the
sensor eye is perceived. Then, press + to increase the flow time and – to
reduce it.
DELAY IN TIME: If required, the delay in time can be modified as follows:
Press the IN button. Wait until a quick flashing of the LED of the sensor
eye is perceived. Then, press + to increase the delay in time and – to
reduce it.
DELAY OUT TIME: This button changes the time interval the water starts to
flush after the user has left the urinal. If required, the delay out time can
be modified as follows:
Press the OUT button. Wait until a quick flashing of the LED of the sensor
eye is perceived. Then, press + to increase the delay out time and – to
reduce it.
24 HOUR HYGIENE FLUSH: If you have a compatible model with a 24 hours
hygiene flush it is possible to enable and disable it.
To activate the hygiene flush, press the clock button. Wait until a quick
flashing of the LED of the sensor eye is perceived. Then press + to
activate the hygiene flush or – to deactivate it.
TEMPORARY OFF FUNCTION: This function is ideal to perform any kind
of activity in front of the sensor without operating the system (for
example,cleaning).
Urinals will remain shut for 1 minute when this button is pressed once. To
cancel this function and to return to normal operation press the On/Off
button again or wait 1 minute.
RESET BUTTON: This function allows the sensor to return to the original
factory preset settings. If required, press the Reset button and without
releasing it, press the + button once.
