Sterling BP810, Operation And Installation Manual

Page: 15 / 54

2 General Information
2-1 Introduction
This family of granulators has been designed to granulate plastic
material such as sprues, runners, and small reject parts.
The granulator is comprised of an infeed hopper into which the
material to be granulated is fed, mounted on a cutting chamber in
which a series of rotary and bed knives reduce the material to
granules, the size of which is determined by the screen holes. The
granules fall and collect in the bin below. The operation of the
granulator is controlled by a control panel and powered by an
electric motor.
2-2 Using This Manual
Use this manual as a guide and reference for installing, operating,
and maintaining your granulator. The purpose is to assist you in
applying efficient, proven techniques that enhance equipment
productivity.
The General Information section outlines models covered, standard
features, and available options. Additional sections within the
manual provide instructions for installation, pre-operational
procedures, operation, preventive maintenance, and corrective
maintenance.
Installation instructions include all required data for receiving,
unpacking, inspecting, and setup of the granulator. Whenever
possible, illustrations have been included to help you complete
these tasks more efficiently. We can also provide the assistance of
a factory-trained technician to help train your operator(s) for a
nominal charge.
Pre-operational procedures include instructions, checks, and
adjustments that should be followed before commencing with
operation of the granulator. These instructions are intended to
supplement standard shop procedures performed at shift, daily, and
weekly intervals.
The Operation chapter includes a description of electrical and
mechanical controls, in addition to information for operating the
granulator safely and efficiently.
Page 15 of 54