This product has 2 tri coloured LEDs located at the side of the product labelled LED1 and
LED2. Each LED has the ability to emit 3 colours and also flash ( denotes the LED
colour which flashes). Red, Orange and Green, by using the 2 LEDs and the 3 colours we
can mix them to give various amounts of information to the user.
LED 1 LED 2 INFORMATION
MAGNETIC
SWITCH
Magnetic
switch
active
*
*
*
*
* *
**
*
Start up for 5 seconds
Start up for 2 seconds
Factory calibration already complete
No calibration, unit defective return to factory 5 seconds
Battery type select window (10sec)
Battery type displayed (5sec)
Red flashing, soft start mode, power ramping up
Unit on fast charge mode
Soft restart Absorption mode
Absorption mode
Soft restart in float mode
Float charge
High voltage trip, Model dependent
In > 15.5/31V or Out > 16/32/48V
High temp trip unit switched off until it cools down
High case temperature, power reduction but unit still working
Input voltage low, unit will switch into sleep mode in 20 mins.
Input voltage is ok, remote is in off state.
Remote needs Pos signal.
S
ta
rt
u
p
s
e
q
u
e
n
c
e
C
h
a
rg
in
g
s
e
q
u
e
n
c
e
No faults all ok