Document # 82070-1026, Revision B
CONFIDENTIAL
© 2011 Copyright VTS Medical Systems, LLC
11 of 32
Remote Control
Overview of Remote Control Functions
Figure 7: The Remote
Control
Key
Description
Power
Turn the monitor on and off
Source
Displays and selects the available input sources
SDI
Switches the input signal to SDI
HDMI
Switches the input signal to HDMI
DVI-D/DVI-A
Switches the input signal to DVI-D or DVI-A
S-VIDEO
Switches the input signal to S-Video
Composite
Switches the input signal to Composite
DisplayPort
Switches the input signal to DisplayPort
RGB
Switches the input signal to RGB
YPbPr
Switches the input signal to YPbPr
VGA
Switches the input signal to VGA
PIP POS
(Position)
When the PIP mode is enabled, adjusts the position of the
secondary image
PAP
Enters and exits Picture-And-Picture (PAP) mode
PIP
Enters and exits Picture-In-Picture (PIP) mode
MENU
Display the OSD menu screen
SWAP
When using PIP and PAP, swaps the PIP or PAP image
source with the main image source.
ENTER
Go to the next step or confirm the OSD setting
Navigate on screen menus
EXIT
Exit the OSD menu
AUTO
Automatically adjust image Clock, Phase, H-Position, V-
Position settings
USER1 - USER5
Load a user profile. Note that the default user names
(User 1 – 5) used on the remote control may have been
changed to custom names in the OSD menus.
INFO
Display on-screen information about the monitor
FUNC-A
Color Temp. Selection
FUNC-B Gamma
Selection
FUNC-C Mode
Selection
Table 4: Remote Control Functions
Changing the Remote Control Battery
1.
Remove the battery cover by pulling then lifting the knob on the cover.
2.
Insert the batteries, corresponding to the positive (+) and negative (-) marking on the battery compartment
3.
Reattach
the
battery cover.
Figure 8: Remote Control Battery Access
