manualshive.com logo in svg

Steris Harmony LED Wall Control Unit, Operator'S Manual

Share
Download
Steris Harmony LED Wall Control Unit Operator'S Manual Download Page 31

5-3

Operating Instructions

Operator Manual

10083002

5.2  Lighthead 

Features

Figure 5-3. HarmonyAIR Surgical Lighting System M Series Lighthead

Rotate Central Lighthandle to 

Adjust Pattern Size

Use Surgeon’s Control Buttons 

to Adjust Intensity

Table 5-1. Harmony Lighthead Features

Feature

Harmony LED Lighthead Type

M5 Lighthead and M7 Lighthead

Pattern Change Capability

Yes

Video Camera Capability

• Optional high definition (HD), or 

standard definition (SD) 

• See 

Section 5.10, Video Camera 

Module Installation or Removal, 
page 5-17

 for further information.

Yes

*

Handle Position

Central

†

Backup Lamp

Not 

Applicable

* Optional high-definition (HD) camera compatibility is available for one lighthead per suspension system. 

The system requires HD components for this option. Standard definition systems can be retrofitted for HD 
operation, contact STERIS for more information.

† HarmonyAIR Surgical Lighting System (M5 and M7) lightheads are equipped with a full-circumference 

bezel, providing six sets of surgeon's intensity control buttons.

Summary of Contents for Harmony LED Wall Control Unit











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands