5-12
122997-341
Operator Manual
Cycle Programming
1.
When desired cycle name is flashing, press
CHANGE VALUES
touch pad to access Change Values mode. Printer records:
* CHANGE VALUE3:51:17P
and, if selected cycle is locked out, display shows:
DO YOU KNOW ACCESS
CODE?
NO
__indicates flashing position.
2.
Press
VALUE (up or down)
touch pad to toggle between YES
and NO answer. If NO is selected, screen returns to cycle menu
once Change Values is pressed.
3.
Press
CHANGE VALUES
touch pad. If YES was selected, dis-
play shows:
ENTER ACCESS CODE
CODE = 0000
__indicates flashing position.
4.
To enter access code, press
CURSOR (left or right)
touch pad
to advance flashing position one space at a time. Press
VALUE
(up or down)
touch pad to select desired number (0-9). Access
code is input as a four digit number from 0001 to 9999. If an
incorrect access code is entered, screen returns to cycle menu
once
CHANGE VALUES
touch pad is pressed.
NOTE: Pressing CURSOR touch pad or VALUES touch pad
repeatedly in one direction cycles through all available positions
or letters and numbers.
5.
Press
CHANGE VALUES
touch pad. Display shows First
Change Values message:
CHANGE CYCLE NAME
CYCLE 1
__indicates flashing position.
At this point, operator has access to all phase value screens of
selected cycle and operating values screens. Sequence and proce-
dures for changing cycle phase and operating values are same as
previously discussed.
NOTE: If Access Code feature is enabled and selected cycle is not
locked out, only operating values are protected by access code.
Access code screen sequence occurs after "Date and Time" screen.
After entering correct access code, operator has access to remaining
operating values screens.
CHANGE
VALUES
VALUE
CHANGE
VALUES
CURSOR
VALUE
CHANGE
VALUES
