manualshive.com logo in svg

Steris Basil 4600, Operator'S Manual

Share
Download
Steris Basil 4600 Operator'S Manual Download Page 67

5-10

122997-341

Operator Manual

Cycle Programming

NOTE: Display is shown only if printer is enabled.

20. Press 

VALUE (up or down)

 touch pad to toggle between YES

and NO answer. Selecting YES generates a printout of cycle
phase values once Save Values or Change Values is pressed.

21. At this point, operator has option to either continue in Change

Values mode or save values and exit Change Values mode. To
continue in Change Values mode, press 

CHANGE VALUES

touch pad. Change Operating Values option screen appears:

CHANGE MISCELLANEOUS
VALUES?

NO

__indicates flashing position.

NOTE: See S

ECTION

 5.4, P

ROGRAMMING

  O

PERATING

  V

ALUES

, for

details on continuing in Change Values mode.

5.4  Programming

Operating Values

1.

Set POWER-OFF/STANDBY, located behind printer door, to
POWER. Unit name temporarily appears on screen then screen
displays first cycle menu:

CYCLE 1

CYCLE 2

CYCLE 3

CYCLE 4

__indicates flashing position.

2.

Press 

CHANGE VALUES

 touch pad to access Change Values

mode.

NOTE: Access to operating values may be made through any
cycle.

First Change Values screen appears:

CHANGE CYCLE NAME
CYCLE 1

__indicates flashing position.

NOTE: Change Values mode may be exited at any time by
pressing Save Values. Control saves changed values and return
screen to selected cycle menu.

3.

Press 

CHANGE VALUES

 touch pad several times to advance

through phase values screens until Change Miscellaneous Val-
ues option screen appears:

CHANGE MISCELLANEOUS
VALUES? NO

__indicates flashing position.

4.

Press 

VALUE (up or down)

 touch pad to toggle between YES

and NO answer. Select YES to continue in Change Values mode.

NOTE: If NO is selected, pressing Change Values or Save
Values returns display screen to cycle menu.

VALUE

CHANGE

VALUES

CHANGE

VALUES

CHANGE

VALUES

VALUE

Summary of Contents for Basil 4600


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands