8
PIN Default: 1234
When the public pin is
0000
it means that the code is empty in the
"Card or Pin"
mode.
After activating this function, the control will emit a continuous and prolonged beep when the door
is not closed, after it was opened normally, or did not open through the control.
Disable the door sensor alarm
Press [
8
] + [
0
]
Enable the door sensor alarm
Press [
8
] + [
1
]
TT
is the time interval in seconds. For example, if the alarm delay time is 3 seconds, it will be:
TT = 03
This function will be performed when the door sensor alarm is enabled.
Alarm delay time
Press [
82
] + [
TT
]
Change public pin
Press [
3
] + [
4 digit pin
]
TT i
s the time interval in seconds. For example, if the door opening time is 3 seconds, it will be:
TT = 03
Change door opening time
Press [
2
] + [
TT
]
