11
After reading card, there are 3
beeps and door lock does not
open.
·
The system is in Card and pin mode.
·
The [#] key was pressed; Wait for 5 seconds to
present card.
The enrolled card can not open
the door.
·
Check if the door sensor is in an alarm status.
·
Disable the door alarm sensor.
Pressing [
*
] + [
Programming pin
]
there is long beep and can not
enter to the programming mode.
Other keys were pressed before pressing the [
*
] key.
Hold down the [*] key after hearing a long sound, try
entering the programming mode again.
Trouble
Solution
Pressing [
5
] + [
User ID code
]
there are 3 beeps.
This user ID code is in use, select another user ID
code.
Pressing [
5
] + [
User ID code
] there
are 2 beeps and then to
presenting card there are 3 beeps.
This card is in use.
Pressing [
5
] there are 3 beeps.
The control has full card capacity.
