Steren MUL-600, Instruction Manual

Page: 45 / 73

99
Button Measurement
function Operation
Power
Any position in the
rotary switch
Press the button to turn on the tester, press again
to turn it off.
Blue
V~
Switching between CA (~) and CD (---) voltage
meter sounds, CD (---) is granted.
Switching between continuity, diode, resistance
and capacitance, the meter will sound, resistance
is taken for granted
μ A ~
Switching between AC Amperes (~) and
CD (---) in the range of 400 uA at 4000 uA, the
meter sounds, CD (---) is for granted
mA ~
Switching between AC Amperes (~) and CD (---)
in the range of 40 mA to 400 mA, the meter will
sounds, CD (---) is taken for granted. Facility to
disable the sleep mode
A ~
Switching between AC Amperes (~) and CD (---)
in the range from 4 A to 10 A, the meter sounds,
CD (---) is for granted.
Range
Rotary switch in any
position except Hz and
capacity.
- Press RANGE to enter the manual range mode;
the meter will beep.
Selecting manually a range causes the meter to
exit the Hold and REL modes.
- Press RANGE to step up to the selected
function, the meter will sound.
- Press and hold RANGE for 2 seconds to return
to autoranging; the meter will beep.
This table gives information about button functions:
BUTTON FUNCTION