Steren MUL-600, Instruction Manual

Page: 56 / 73

20 20
Measurement Range
The measurement range determinates the highest value that can be measured.
Most testers have more than one range. See “Accuracy Speci
fi cations”.
A. Measure range selection
It is important to start with the right measure range.
- If the range is too low, the tester will show 0L to indicate an
overload.
- If the range is too high, the tester will not show the most
exact measurement.
The multitester has both options, manual and auto range:
- In the auto range mode, the tester selects the best range for the input signal.
This allows the test points change without selecting the range.
- In the manual range mode, you must select the range. This allows to select a
speci
fi c range.
B. Manual range and Auto range