7
3. OPERATION INSTRUCTIONS
1. Place the DMX on a stable surface. Remember that the DMX also can be
placed on a rack to occupy three spaces.
2. Connect the ac or dc power supply on the rear panel and to the main power
supply.
3. Connect the DMX cables toward the lighting equipment as described in the
manual of each device.
3.1 Adjusting system
22. Polarity switch: this button can be used to correct the signal polarity.
23. DMX output.
24. ON/OFF switch.
FADETIME
SPEED
0.1 SEC
30 SEC
SCANNER BUTTONS
SCENE BUTTONS
PROG
SE
SE
