manualshive.com logo in svg

Stentorfield Contour, Operator'S Manual

Share
Download
Stentorfield Contour Operator'S Manual Download Page 20

Tea Pot Brewer Cleaning

At the same time as the coffee brewer is being cleaned, the tea brewer (where fitted)
should also be removed and cleaned.

Safety First! Never clean or service the tea pot brewer unit while it is in
motion as fingers may become trapped in the mechanism.

Referring to the illustrations, proceed as follows:- 

1.

Remove the tea pot bowl and mounting bracket
assembly from the machine.

Clean all parts of the tea pot bowl assembly and
mounting bracket using the liquid destaining agent.
Follow the instructions for soak cleaning on the
product packaging.

Rinse all components with clean water and dry
thoroughly.

2.

Undo the thumb screw retaining the brewer unit.

Remove the complete brewer unit from the
machine as shown.

3.

Split the brewer unit into its separate parts as
shown.

Clean bowl (a), gauze (b) and outlet (c) using the
liquid destaining agent. Follow the instructions for
soak cleaning on the product packaging.

Rinse all components in clean water, dry
thoroughly and refit to machine.

Re-fit tea pot bowl/mounting bracket assembly.

18

Operator’s Manual

a

b

c

Summary of Contents for Contour









































Reviews:

No comments

Brands by name

Popular brands

Load more brands